The Perfect RC Airplane For Beginners

As the newest member of the FMS multi-purpose aircraft lineup, the 1220mm Ranger V2 retains all of the fantastic features that pilots have come to expect from FMS stable flight characteristics, ease of assembly, and realistic general-aviation inspired design.

Built with ultralight EPO foam, the large high-winged airframe configuration gives the Ranger stable flight characteristics and low wing-loading with extraordinary amounts of lift, even at slow speeds. Robust plastic struts give extra strength to the wings during aerobatic maneuvers and the patented high-strength “crash-proof” spring cushioned nose landing gear makes ground handling a breeze.

A great aircraft is nothing without a great, dependable power system. FMS has equipped the ranger with a 3136/1200KV outrunner motor with 20A Predator ESC, which allows the ranger to climb almost vertically on demand!

Featuring red, yellow, or green color schemes, the ranger can always be easily orientated even in overcast weather. Designed specifically for beginner pilots, the ranger boasts effortless assembly. Requiring only several screws and twist-locks to complete assembly, the longest wait time is the time it takes to charge the battery! Additionally, the two-piece design of the fuselage and main wing reduces packaging size by thirty percent, facilitating easy transport and storage!

Reflex V3, an onboard flight stabilization system, is factory installed. The Reflex system features Stabilized, Optimized and Manual flight modes. Reflex V3 is a trusty co-pilot that is perfect for pilots of any skill level.

Don’t miss out on one of the most revolutionary FMS aircraft, the amphibious ranger V2!

Notes to Buyers:

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ For the float-equipped Ranger V2, the plane and floats will be sent as two separate packages.

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase.
With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players' transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.
Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.
For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.
The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Skill, know-how and space has always been limiting factors in bringing new enthusiasts into the wonderful world of R/C aviation, until now!
FMS has always been dedicated to enabling pilots of every skill level to enjoy the thrills of flight. Innovation then, is in our DNA.
FMS is proud to announce the 850mm Ranger. Like its sibling, the high winged airframe design with a tricycle landing gear, is very easy to fly by default. A dedicated flight control paired with a GPS sytem allows pilots to fly under beginner, intermediate and fully manual flight modes. An innovative flight perimeter fence and return to home functions provide bulletproof reliability and ease of mind- flying has never been so simple.

Flight perimeter fence function: if the aircraft is in excess of 120m away from the pilot, the aircraft will return to home automatically, with the pilot having the option of taking over the controls at any time. Once over the home point, the aircraft will circle at a 25m altitude at roughly 40km/h.
Return to home function: in the off chance that the pilot loses orientation of the aircraft, the return to home function can be triggered and the aircraft will fly back to the home point. Like the flight perimeter function, this function does not take away the pilots' ability to control the aircraft at any time.
Once over the home point, the Ranger 850 circles until further control inputs are given.
Absolute beginners rejoice! The FMS 850mm Ranger has everything that is needed for flight! A 12A esc/receiver combo reduces the need to connect cables and a 2315-3850kv motor, 7.4V 850mAh 25c battery and four 1.9g micro servos give the lightweight 305g aircraft incredible performance. Fly at a small park, basketball court or even your own back yard!
The innovative 850mm Ranger is the perfect way to start earning your wings!

Types Function:

PNP ( with Reflex V3): Have reflex function, without flight perimeter fence & return to home function.

Exclusive Innovative Reflex system allows pilots to fly under beginner, intermediate and fully manual flight modes. On Stabilized Mode, it can control surface travel allows tame flight characteristics for beginner pilots and can turn on an emergency recovery flight mode when lose control. On Optimized Mode, It Minimizes environmental effects on the airframe - pilot retains maximum control while the Reflex system neutralizes attitude changes caused by whin gusts. OFF Mode, Reflex system off - RC pilot can reach unlimited roll movement by themself improving skill.

RTF (with Gyro): 

Have flight perimeter fence & return to home function, without reflex function.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

An Essential, Classic, and Realistic Civil Airplane

The Cessna 182 is a popular small single-engine propeller aircraft that first appeared in 1956. It plays a crucial role in general aviation and is widely used in various fields such as private flying, flight training, business cruising, aerial photography, aerial patrols, geographic surveyance, and emergency medical rescue.
Authorized by Textron Innovations Inc., the FMS 1500mm Cessna 182 adheres to the long-standing product philosophy of "Scale appearance, excellent performance," faithfully reproducing the appearance of the real aircraft and replicating its reliability, versatility, flexibility, and ease of operation. Whether you're a beginner pilot eager to progress or an enthusiast seeking recreational flying, the FMS Cessna 182 is undoubtedly a must-have choice.

What's In The Box

• 1500mm Cessna 182
• 3541-KV840 Motor (installed)
• 40A ESC with Reverse Thrust Function (installed)
• 7x 9g Plastic Digital Servo (installed)

Notes to buyers

• Recommend using 4S battery.
• ESC has overheat protection. For continuous flights, wait three minutes after changing each battery before taking off again.
• Floats and Reflex V3 are not included and need to be purchased separately.
• RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
• PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Specification

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
As a relative of the popular 1400mm J-3 Cub, the 1700mm PA-18 Super Cub retains great flight characteristics while offering increased power and wingspan.

Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized balloon tires- the 1700mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.

Utilizing the latest FMS hardware and design, the 1700mm PA-18 Super Cub has pre-installed ball-link type pushrods, integrated servo connectors in the wing structure and can be assembled very easily using no glue at all.

For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.

Versatile, fun and exceptionally relaxing to fly- the 1700mm PA-18 Super Cub is a great addition to any fleet!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Background

Land Rover has earned its place as a global leader in off-road vehicles, blending unmatched capability with innovative engineering. Iconic models like the Defender, Range Rover, and Discovery have proven their strength in extreme conditions and legendary events such as the Camel Trophy, cementing Land Rover’s reputation for endurance, resilience, and technology.

Defender
Since its debut in 1948, the Defender has become a symbol of rugged reliability. Trusted by military units, rescue teams, and off-road adventurers alike, its high ground clearance and durable design made it a standout in the Camel Trophy—where it came to embody resilience and toughness under the harshest conditions.

Range Rover
First launched in 1970, the Range Rover set the standard for combining luxury with proven off-road performance. Its presence in the Camel Trophy demonstrated that capability and refinement can go hand-in-hand, making it the ultimate choice for drivers seeking both prestige and adventure.

Discovery
Introduced in 1989, the Discovery struck a balance between off-road capability, everyday comfort, and family practicality. Designed for versatility, it excelled on rugged terrain while offering comfort and convenience for passengers—proving itself as a true adventure-ready SUV.

Land Rover Legacy
Land Rover is more than a vehicle manufacturer—it is a global symbol of exploration and adventure. The brand’s deep connection to the Camel Trophy helped define its identity, inspiring generations of enthusiasts to embrace discovery, endurance, and freedom. With a legacy built on toughness, innovation, and iconic design, Land Rover continues to shape the future of off-road driving.

Introduction

FMS proudly introduces the 1/10 scale Land Rover Camel Trophy Series, featuring officially licensed models of the Defender, Range Rover, and Discovery. Built on the proven FCX10 chassis, these RC crawlers deliver trail-tested durability and performance worthy of the Land Rover name.

Each model is packed with scale-accurate details, including side mirrors, snorkels, working spotlights, and a fully detailed interior. The durable PC soft plastic body comes with pre-installed headlights, reverse lights, and mudguards, ensuring both realism and rugged protection.

The FCX10 chassis is engineered for stability and control, with a front-center motor layout, four-link suspension, and straight axles at both the front and rear to maximize traction. A low-mounted motor and transmission unit lowers the center of gravity, helping reduce rollovers and keep the vehicle planted on challenging terrain.

Ready for adventure, the FMS Land Rover Camel Trophy Series combines authentic design with practical trail performance, capturing the legendary spirit of Land Rover in every drive.

What’s in the Box:

• 1 × FCX10 Land Rover RS
• 1 × MG6 6-Channel Transmitter
• 1 × R6D-ESC-BS Receiver (pre-installed)
• 1 × 550 Brushed Motor 32T (pre-installed)
• 1 × Product Manual

Needed to Complete:

• 4 × AA Batteries for the transmitter
• Battery & Charger for the kit (Recommended: 2S or 3S 5000mAh with XT60 plug)

Note to Buyer:

• This product is recommended for ages 14 and up. Children under 14 should use it only under adult supervision.
• Receivers may vary between old and new versions. Old version: Turn signals remain always on. New version: Turn signals can be switched on or off by the user.

Specification:

The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24

FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.

Introduction

Scale Authenticity Meets Off-Road Adventure

The FMS Tacoma brings the rugged spirit of Toyota’s legendary pickup into the world of RC. This officially licensed 1:24-scale crawler blends true-to-scale design with serious off-road performance in a compact, go-anywhere crawler.

From the ABS hard body to the molded grille, mirrors, door handles, and bumpers—every detail is captured. It’s available in three factory-matched colors—Gray, Red, and Blue.

Built on the next-generation FCX24M chassis, the Tacoma features a 153mm (6.02") extended wheelbase, ladder-frame construction, and solid axles for increased durability and torque control. The all-new off-road tires deliver excellent grip and ground clearance, giving this micro-crawler big-truck performance.

Powered by a high-torque 050 motor and equipped with a two-speed transmission, the Tacoma is ready to crawl slowly or hit top speed on demand. The included 2S 380 mAh LiPo battery delivers up to 30 minutes of runtime per charge.

Whether you’re building micro-terrain indoors or taking on backyard trails, the FMS Tacoma is ready for whatever comes next. It’s not just a model—it’s an RC tribute to one of the most dependable off-road trucks ever built.

What’s in the Box:

• 1 × 1:24 FCX24M Toyota Tacoma RTR (with installed electronics)
• 1 × 2.4GHz G3 Transmitter
• 1 × R3A Receiver (pre-installed)
• 1 × 050 Brushed Motor (pre-installed)
• 1 × Product Manual

Needed to Complete:

• 4 × AAA Batteries for the Transmitter
  

Specification: