VIP Adventurer
FMS
Use the filter menu to find your desired model!
25 - 48 of 2161 products
-
-
-
-
-
-
-
-
-
FMS Customized 24 in 1 Multi-function Screwdriver Set (Aluminum Handle) In stock£15.99 GBP£15.99 GBP -
-
-
-
-
-
-
Save £34.00
-
-
-
REAR AXLE ASSEMBLY FOR FCX10 TOYOTA LC80, FCX10 Discovery/Range Rover/Defender 110 In stock£32.99 GBP£32.99 GBP -
FCX24M Discovery/Range Rover/Defender 110 Transmission Gear Box Assembly (Full Metal Gear) In stock£22.99 GBP£22.99 GBP -
-
FCX24M Gear for Axle
Description
For FCX24M Discovery/Range Rover/Defender 110
¢Ù Front Axle Assembly: C3416, MUST paired with?FCX24M Front Axle Plastic Parts V2 (SKU=C3413V2)?
¢Ú Rear Axle Assembly: C3416, MUST paired with FCX24M Rear Axle Plastic Parts V2 (SKU=C3414V2)
For Defender 90
¢Ù Front axle: C3416, MUST paired with paired with FCX24M Front Axle Plastic Parts V2 (SKU=C3413V2)?
FCX10 Discovery/Range Rover/Defender 110 FCX10 Fuel Tank Set
Description
FCX10 Range Rover/Defender Mt Tires 4.3" 1 Pair (25 Degrees) with Foam
Description
Upgrade Parts - FCX24M Recovery Board
Charger With Adapter Wire - Ships from UK
Description
For 1:6 Jimny, FCX10 LC80, FCX10 PRO LC80, 1:10 FJ40, 1:10 Mashigan, 1:10 Atlas, FCX10 Discovery/Range Rover/Defender 110
Applicable to 1280mm Easy Trainer, 800mm Warbirds, 850mm Ranger, 800mm Easy Trainer, 800mm P51D, 800mm F4U V2, 800mm T28 V2, 800mm Zero V2, 1200mm Super EZ V4, 1220mm Ranger V1 & V2, 1500mm Maule, 64mm F-35 V2, 1400mm J-3, 1400mm Kingfisher, 1100mm A6M5 Zero, 1020mm F3A
Available for charging battery 1S 3.7V & 2S 7.4V & 3S 11.1V
1220mm Ranger Wing Strut Set
Description
FMS Customized 24 in 1 Multi-function Screwdriver Set (Aluminum Handle)
Upgrade Parts - FCX24 High Speed Motor Set
Description
For 1:24 Smasher, Power Wagon, K5 Blazer, Unimog 421
130 high-speed motor, with up to 40,000 rpm, and a maximum speed of 20km/h. Experience powerful climbing on rough and rocky roads, and feel the speed on open and flat roads.
Before purchasing the high-speed motor, be sure to pay attention to the following notes:
1. Please confirm whether the battery to be used with this motor is equipped with a PCM (protective circuit modul). If there is a PCM, you are advised to purchase a battery without, to avoid the situation that the ESC is turned off due to battery protection caused by excessive current.
2. Do not use more than three batteries in a row to prevent overheating damage to electronics or scalding on the user.
3. It is recommended to add a heat sink (C3067) while upgrading to the high-speed motor to effectively reduce the motor temperature and prolong the life of the motor.
FMS 1:10 Toyota Land Cruiser FJ40 RS
Description
Classic Adventure In Your Hands
Among Toyota's many car series, the Land Cruiser series is recognized as the most combat-ready off-road vehicle in the world. If you want to choose the most representative model among them, FJ40 is one of the best. Toyota FJ40, known as one of the most familiar representatives of the Toyota family, is a classic model with a strong retro style and unique charm, carrying Toyota's rich history and tradition in the off-road field. The Toyota FJ40 launched by FMS will continue the classics.
What's in the box:
1 x 1:10 Toyota Land Cruiser FJ40 RS
1 x 2.4GHz Transmitter (Fibre Style)
1 x 2.4GHz Receiver(installed)
1 x 40A ESC(installed)1 x 550 Brushed motor (installed)
1 x 9g Servo For Steering Wheel （forward）(installed)
1 x 15kg Metal Gear Servo(installed)1 x Product Manual
Needed to Complete:
4 x AA Batteries for Transmitter
Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
| Length | 571mm |
| Width | 268mm |
| Height | 326mm |
| Wheelbase | 339mm |
| Tire F/R | Φ 115mm |
| Approach Angle | 65° |
| Departure Angle | 40° |
| Ground Clearance | 82mm |
| Motor | 35T 550 Brushed motor |
| Remote control distance | 80m |
| Remote control | 2.4GHz Transmitter (Fibre Style) & Receiver Set |
1:18/1:24 LUGGAGE CARRIER SET
FCX10 13G METAL GEAR SERVO WATERPROOF
Description
For FCX10 K5, FCX10 LC80, FCX10 PRO LC80, FCX10 Discovery/Range Rover/Defender 110
FMS 1:24 FCX24M Toyota Tacoma RTR
Description
Introduction
Scale Authenticity Meets Off-Road Adventure
The FMS Tacoma brings the rugged spirit of Toyota’s legendary pickup into the world of RC. This officially licensed 1:24-scale crawler blends true-to-scale design with serious off-road performance in a compact, go-anywhere crawler.
From the ABS hard body to the molded grille, mirrors, door handles, and bumpers—every detail is captured. It’s available in three factory-matched colors—Gray, Red, and Blue.
Built on the next-generation FCX24M chassis, the Tacoma features a 153mm (6.02") extended wheelbase, ladder-frame construction, and solid axles for increased durability and torque control. The all-new off-road tires deliver excellent grip and ground clearance, giving this micro-crawler big-truck performance.
Powered by a high-torque 050 motor and equipped with a two-speed transmission, the Tacoma is ready to crawl slowly or hit top speed on demand. The included 2S 380 mAh LiPo battery delivers up to 30 minutes of runtime per charge.
Whether you’re building micro-terrain indoors or taking on backyard trails, the FMS Tacoma is ready for whatever comes next. It’s not just a model—it’s an RC tribute to one of the most dependable off-road trucks ever built.
What’s in the Box:
- 1 × 1:24 FCX24M Toyota Tacoma RTR (with installed electronics)
- 1 × 2.4GHz G3 Transmitter
- 1 × R3A Receiver (pre-installed)
- 1 × 050 Brushed Motor (pre-installed)
- 1 × Product Manual
Needed to Complete:
- 4 × AAA Batteries for the Transmitter
Specification:
| Length | 253mm |
| Width | 105mm |
| Height | 105mm |
| Wheelbase | 153mm |
| Tread (F/R) | 86 mm |
| Ground Clearance | 30 mm |
| Approach Angle | 49° |
| Departure Angle | 43° |
| Tire Size | Ø47 × 17 mm |
| Transmitter | G3 2.4GHz |
| Receiver/ESC Unit | R3A with integrated ESC |
| Motor | 050 Brushed Motor |
| Recommended Battery | 7.4V 380mAh 2S LiPo Battery with 51005 2-Pin Male and XH2.54 3-Pin Male Connectors |
| Drive System | 4WD |
| Bearings | Full metal ball bearings |
| Waterproof Rating | Splash-proof |
| Runtime | Up to 30 minutes |
| Control Range | 80+ meters (open areas) |
FMS 1:24 FSC24 Chaser Short Course Truck RTR
Description
FSC24 Chaser - 1:24 Short Course Truck
The Perfect Short Course Truck for Beginners to Master Speed and Control.
Background
The Baja 1000, which began in 1967, is one of the most challenging and thrilling off-road events in the world. Short-course trucks, often referred to as light trucks, are typically designed for urban use and short-distance transport, prioritizing efficiency and agility. However, in events like the Dakar Rally, these trucks undergo extensive modifications, including upgrades to their suspension, chassis, specialized tires, and cockpit safety features. These enhancements equip the trucks to navigate harsh terrains such as desert dunes, rocky landscapes, river crossings, and mountains, enabling them to perform exceptionally well under extreme conditions.
Introduction
The FSC24 Chaser is available in two striking paint schemes, featuring a plastic shell crafted using a blister process and adorned with eye-catching stickers that stand out on any terrain.
FMS has developed a new-generation FSC24 chassis, equipped with front independent suspension and a rear straight axle. The frame is constructed from high-strength nylon, providing an ideal balance of lightness and durability. The mid-mounted power unit, with its low center of gravity, incorporates a two-speed transmission and a 370 high-speed brushed motor into a single compact unit. The two-speed transmission is controlled via CH3 on the remote, while metal planetary gear differentials at both axles ensure robust torque delivery for high-speed off-roading, exceptional cornering, and a realistic stance.
What's in the box:
- 1 x 1:24 FSC24 Chaser RTR
- 1 x 2.4GHz G3 V3 Transmitter
- 1 x R3B Receiver with ESC Group Control Board (installed)
- 1 x 370 Brushed Motor (installed)
- 2 x 13g Metal Servo (installed)
- 1 x 2S Lipo 7.4V 900mAh 25C with XT30 Connector
- 1 x USB Charger
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
Specification:
| Length | 236mm |
| Width | 143mm |
| Height | 107mm |
| Wheelbase | 140mm |
| Tire F/R | D: 54mm, W: 23mm |
| Minimum Ground Clearance | 33mm |
| Approach Angle | 63° |
| Departure Angle | 53° |
| Motor | 370 Brushed Motor |
| Servo | 13g Metal Servo x 2 |
| Battery | 2S Lipo 7.4V 900mAh 25C with XT30 Connector |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 30mins |
| Remote Control | G3 V3+ Transmitter, R3B Receiver with ESC Group Control Board |
REAR AXLE ASSEMBLY FOR FCX10 TOYOTA LC80, FCX10 Discovery/Range Rover/Defender 110
Description
FOR FCX10 TOYOTA LC80, FCX10 Discovery/Range Rover/Defender 110
FCX24M Discovery/Range Rover/Defender 110 Transmission Gear Box Assembly (Full Metal Gear)
Upgrade Parts - FCX24M Defender 110/90 Spotlight Bracket
